FAQ Answer
At a shared delivery site used by multiple carriers, how should you configure geofence boundaries, dwell thresholds, and reporting intervals so a vehicle's arrival event still lines up with its own proof of delivery, and what should you do when two vehicles enter the same zone within a short window?
Start with the boundary itself. Draw the zone to the actual handover point, not the whole yard. If a customer site shares a bay with a neighbouring business, a single wide zone will register arrivals for the wrong vehicle and can log a POD against a handover that never happened. Before you move on, confirm the platform offers vertex or radius control. A polygon that follows the fence line and the ramp is worth far more than a generous circle, and it is the foundation everything else rests on.
Next, add a dwell threshold. This is the minimum time a vehicle must stay inside the boundary before an entry is treated as an arrival. Setting a dwell window lets queuing traffic and pass-throughs drop out of the event stream without touching legitimate stops. Be realistic about the result. A dwell threshold can reduce false arrivals, but it will not remove them in every case, so keep watching the first weeks of software-free-trial-to-full-fleet-operations-a19b12" class="faq-link faq-link-internal auto-internal-link">data rather than assuming the problem is solved.
Then look at reporting intervals. A location update only becomes a geofence entry or exit event if the device is sending fixes at a cadence the platform is actually checking. If vehicles go quiet near buildings or inside covered bays, the recorded time can drift from the physical handover, and the POD timestamp may end up later than the zone entry it should match. Calibrate the reporting interval against the platform's checking cadence, but accept that a tighter interval does not guarantee timely firing. Coverage and device behaviour still matter.
Overlapping zones deserve their own attention at multi-carrier sites. Two carriers may legitimately define zones over the same bay, which is not automatically a configuration error. What does cause trouble is duplicate rules firing several events for a single movement, because a timeline with three entries for one van is hard to rebuild. Decide which zones and rules are authoritative, disable the ones that only echo another, and keep a written record of why each remains.
Validation is where most setups quietly fail. Do not sign off on a map preview. Drive a live vehicle to the real handover point and confirm the entry fires where you expect. Then watch a full day of traffic, not a single test run, because the interesting failures show up when the yard is busy.
Now the near-simultaneous case. Two vehicles enter the same zone within a short window, and both produce entry events. Reconcile rather than guess. Pair each POD record, with its photo, signature, and timestamp, to its own arrival event using the vehicle identifier and the sequence of events, then confirm the route rebuilds in order from first entry to last exit. If the two arrivals cannot be separated cleanly, the zone shape or dwell window is still too broad for that site.
A few cautions stay with you afterwards. Offline tolerance matters, because late reports arriving in a burst can compress several hours of movement into a few minutes of records. Keep zone review on a schedule, so a new gate, changed delivery hours, or a reshuffled bay does not turn into silent configuration drift. And when proof of delivery has to stand as evidence across carriers or through a formal review, recognise the point where tuning radius and dwell no longer helps. At that stage the zone logic, the device feed, and the delivery capture need to be designed as one workflow, sequenced together on fleet management software with a clear audit trail. That decision, more than any single alert, is what settles a disputed delivery.
Support Context
Why this answer matters
This FAQ is sourced directly from our support database. It helps teams deploy GPSController faster, reduce onboarding friction, and understand platform compatibility for real-world fleet operations.
Answer summary
A shared delivery site is the hardest place to get geofence creation right, because one loading bay serves several carriers and every vehicle that rolls past looks like an arrival to a boundary that is drawn too loosely. The fix is not one...
Who it helps
- Fleet managers validating device compatibility
- Operations teams planning installation workflows
- Support teams troubleshooting GPS platform setup
- Platform-ready guidance for GPS devices and integrations
- Clear operational steps for setup and troubleshooting
- Updated answer content aligned with live deployments
Key terms
GPS tracking, fleet management, device installation, protocol setup, connectivity validation, and GPSController compatibility.
Implementation checklist
- Confirm device model, firmware, and protocol version
- Validate SIM coverage and network band support
- Map required sensors and IO configuration
- Test live device reporting before full rollout
Ideal use cases
- Fleet tracking, cold-chain monitoring, and asset recovery
- Compliance audits and safety analytics
- Fuel monitoring and route optimization
- Driver behavior insights and incident response
How to apply this
Collect device specs and confirm integration requirements.
Align configuration with GPSController platform rules.
Run a pilot test and scale across the fleet.
Related FAQs
When should I consider upgrading my fleet tracking system to prevent spoofing?
You should consider upgrading when you can't trust location data for core operations like verifying deliveries or getting reliable geofencing alerts for importa...
Can GNSS spoofing affect multiple vehicles in a fleet simultaneously?
Yes, absolutely. A powerful transmitter near your yard or depot can drown out real GPS signals for every vehicle and tracker in the area, making it appear as if...
What are the main compliance risks for delivery fleets from GNSS spoofing?
GNSS spoofing makes your operational records fraudulent. This includes ELD logs for driver hours, geotagged proof-of-delivery documents, and route histories. If...
How can I distinguish between GNSS spoofing and normal GPS signal loss in my fleet?
Look for physically impossible data patterns. Spoofing often shows sudden huge location jumps, steady directional drift, or vehicles appearing in impossible loc...
Can GPS jamming detection software differentiate between natural signal blockage and active jamming?
Usually no. Most software cannot tell the difference between natural signal blockage (like a metal building) and active jamming. This often leads to false posit...
When should I replace my tracking system instead of just upgrading software?
Replace when your current hardware lacks RF sensing capability and you face high-theft risk or strict compliance needs. Software alone cannot generate the foren...
Answer Snapshot
A shared delivery site is the hardest place to get geofence creation right, because one loading bay serves several carriers and every vehicle that rolls past looks like an arrival to a boundary that is drawn too loosely....



















