Sale is liveUpto 70% Off
00D
00H
00M
00S
Global Reach
US flagGB flagDE flagFR flagIN flagAE flagSG flagAU flagCA flagBR flagZA flagNG flagJP flagKR flagID flagES flagIT flagMX flagTR flagSA flag
US flagGB flagDE flagFR flagIN flagAE flagSG flagAU flagCA flagBR flagZA flagNG flagJP flagKR flagID flagES flagIT flagMX flagTR flagSA flag

FAQ Answer

Question

Can I fix AIS 140 compliance issues without replacing the GPS device?

Answer
You can tune the reporting interval back to 30 seconds and reconfigure the device firmware to use a secondary GSM module for backup connectivity. However, if your primary network has coverage dead zones on key transport routes, you will need to redesign the telematics setup with a multi-network SIM or replace the unit with one that supports satellite fallback.

Related FAQs: When should I consider replacing my current GPS trackers versus updating software?
Category: gps_device_advancedUpdated: Apr 24, 2026

Support Context

Why this answer matters

This FAQ is sourced directly from our support database. It helps teams deploy GPSController faster, reduce onboarding friction, and understand platform compatibility for real-world fleet operations.

Answer summary

You can tune the reporting interval back to 30 seconds and reconfigure the device firmware to use a secondary GSM module for backup connectivity. However, if your primary network has coverage dead zones on key transport routes, you will nee...

Who it helps

  • Fleet managers validating device compatibility
  • Operations teams planning installation workflows
  • Support teams troubleshooting GPS platform setup
  • Platform-ready guidance for GPS devices and integrations
  • Clear operational steps for setup and troubleshooting
  • Updated answer content aligned with live deployments

Key terms

GPS tracking, fleet management, device installation, protocol setup, connectivity validation, and GPSController compatibility.

Implementation checklist

  • Confirm device model, firmware, and protocol version
  • Validate SIM coverage and network band support
  • Map required sensors and IO configuration
  • Test live device reporting before full rollout

Ideal use cases

  • Fleet tracking, cold-chain monitoring, and asset recovery
  • Compliance audits and safety analytics
  • Fuel monitoring and route optimization
  • Driver behavior insights and incident response

How to apply this

Step 1

Collect device specs and confirm integration requirements.

Step 2

Align configuration with GPSController platform rules.

Step 3

Run a pilot test and scale across the fleet.

Related FAQs

Answer Snapshot

You can tune the reporting interval back to 30 seconds and reconfigure the device firmware to use a secondary GSM module for backup connectivity. However, if your primary network has coverage dead zones on key transport...

GPS TrackingFleet OpsDevice SetupCompatibility