FAQ Archive
GPSController FAQs - Page 20
Browse older support questions without loading full answer pages into the archive.
FAQ
Can signal jammers really disable my vehicle recovery device?
Yes. Inexpensive RF jammers flood the GPS L1 frequency, making the receiver lose its lock. Modern devices need an inertial backup to detect movement when GPS is jammed or unavailable.
Read full answer ->FAQ
What is the biggest weakness of current GPS trackers for stolen cars in India?
It's the reliance on single-network cellular data and deep sleep modes that cause missed real-time alerts during the critical first minutes of a theft. The GPS accuracy itself is often not the main issue.
Read full answer ->FAQ
When should a farmer replace their cattle tracking system entirely?
Replace when consistent signal loss leads to missed boundary alerts, battery replacement becomes a weekly chore, or the data is too unreliable for managing grazing patterns or audit requirements.
Read full answer ->FAQ
Can I track a whole herd with one GPS tracker?
Technically yes, but it's a high-risk strategy. Herds can scatter, and a single point of failure means complete visibility loss. For effective herd management, tracking multiple key animals is necessary.
Read full answer ->FAQ
How does weather affect cattle tracker GPS accuracy?
Heavy cloud cover, monsoon rains, and dense tree canopy in grazing areas can weaken GPS signal strength, causing position inaccuracies of hundreds of meters, making geofence alerts unreliable.
Read full answer ->FAQ
What is the biggest problem with GPS trackers for cattle in India?
The biggest problem is unreliable signal acquisition in varied terrain leading to data blackouts, combined with battery drain that doesn't match advertised life under real grazing conditions.
Read full answer ->FAQ
What causes delayed geofence alerts on construction sites with waterproof trackers?
Delayed alerts are caused by cellular modules that can't hand off between tower networks fast enough on peri-urban sites, causing location data to arrive in batches hours later. This breaks real-time theft alerts and mak...
Read full answer ->FAQ
When should I replace a fleet of waterproof GPS trackers on construction equipment?
Replace when you see consistent 4+ hour delays in location updates across multiple sites and carriers, or when audit reports keep showing engine-on events with zero movement. This indicates fundamental sensor or communic...
Read full answer ->FAQ
How does monsoon season affect GPS tracking beyond water damage?
High humidity corrodes unprotected external antenna connectors, not just the main unit. Also, site internet for the gateway often fails, causing data to queue up on the device until its memory fills and it starts discard...
Read full answer ->FAQ
Why do waterproof trackers lose signal in urban construction projects despite their rating?
Signal loss is often from cellular network congestion or because the tracker is mounted under thick steel frames. Waterproofing doesn't improve antenna sensitivity; for low-reception spots, you need a device with ports f...
Read full answer ->FAQ
What IP rating is truly sufficient for Indian construction equipment trackers?
IP68 is a starting point, but the dust ingress rating (the '6') is critical. You should look for devices tested to MIL-STD-810G for vibration resistance, because constant jolting breaks seals faster than water pressure d...
Read full answer ->FAQ
Can signal jammers affect remote immobilizer functionality?
Yes, GSM jammers can block the command signal to the immobilizer. However, a well-configured tracker should log the jamming attempt and trigger secondary alerts based on the last known GPS position and ignition state, pr...
Read full answer ->