FAQ Archive
GPSController FAQs - Page 386
Browse older support questions without loading full answer pages into the archive.
FAQ
What are the main challenges with GPS pallet tracking at operational scale?
Key challenges include GPS dead zones in metal-clad areas causing stale location data, cellular congestion delaying location pings during peak hours, and signal handoff failures between hybrid networks that can make pall...
Read full answer ->FAQ
When should you upgrade your current pallet tracking system?
Upgrade when the cost of inventory reconciliation labor exceeds the cost of new hardware, or when fulfillment errors traced to location data exceed a tolerable threshold (typically more than 2% of picks). If you can't ge...
Read full answer ->FAQ
What causes a pallet to show in the wrong warehouse location in tracking systems?
The most common causes are signal multipath interference in dense storage aisles where radio waves bounce off metal, delaying location calculations. Another cause is failed state transitions in the tag's logic where it d...
Read full answer ->FAQ
How accurate is GPS for tracking pallets inside a large warehouse?
Standalone GPS is largely ineffective indoors. Modern 2026 systems use hybrid GPS for yard tracking and switch to UWB or Bluetooth mesh networks inside. Indoor accuracy can be sub-meter, but only if the infrastructure of...
Read full answer ->FAQ
What's the impact of GPS tracking blind spots on manufacturing operations?
Tracking blind spots create operational blindness where containers appear stationary while actually moving, causing false idle time reports. Planners get misled into thinking containers are available when they're already...
Read full answer ->FAQ
When should a manufacturing company upgrade their entire container tracking system?
Upgrade when signal loss causes tangible workflow breaks like missed replenishment windows, regular manual searches, failed compliance audits for asset location, or when the cost of not knowing exceeds new hardware costs...
Read full answer ->FAQ
Does improving cellular coverage fix container tracking gaps in manufacturing yards?
No. Cellular networks only transmit location data after the GPS module calculates it. If the GPS signal is blocked by metal structures, there's no location to transmit regardless of cellular signal strength. Improving ce...
Read full answer ->FAQ
What causes container trackers to show 'last seen' hours ago even when the asset is on site?
This is typically a cold start or signal blockage issue. The tracker lacks satellite lock when moving from indoor storage to outdoor yards, so it can't send new position fixes even though it's still powered. The data del...
Read full answer ->FAQ
Why do GPS trackers on returnable containers fail to show accurate locations inside manufacturing facilities?
GPS accuracy degrades severely indoors due to metal roofs and machinery creating Faraday cages that block signals entirely. Standard GPS can be off by 50-100 meters or show no location at all in industrial environments w...
Read full answer ->FAQ
What is the critical mistake teams make when evaluating GPS temperature tracker data?
Teams often assume that synchronized GPS and temperature data on dashboards means real-time operation, when in fact the data is historically reconstructed. This leads to making compliance decisions based on false synchro...
Read full answer ->FAQ
What's the final sign that I need a new cold chain tracking system?
When you cannot achieve simultaneous, real-time transmission of location and sensor alerts without resorting to firmware hacks that drain batteries or cause GPS dropouts, that indicates a hardware limitation requiring sy...
Read full answer ->FAQ
Can upgrading cellular plans fix GPS temperature tracker delays?
Usually not. The bottleneck is often the device's processing power and firmware logic, which determines what data to send first. Better cellular plans don't change the device's internal buffering behavior during weak sig...
Read full answer ->