FAQ Answer
Support Context
This FAQ is sourced directly from our support database. It helps teams deploy GPSController faster, reduce onboarding friction, and understand platform compatibility for real-world fleet operations.
Answer summary
Relay attacks involve amplifying a key fob's signal from inside a house to unlock and start a car remotely. Factory alarms often don't detect these attacks because the car appears to be legitimately unlocked and started with the own...
Who it helps
Key terms
GPS tracking, fleet management, device installation, protocol setup, connectivity validation, and GPSController compatibility.
Implementation checklist
Ideal use cases
How to apply this
Collect device specs and confirm integration requirements.
Align configuration with GPSController platform rules.
Run a pilot test and scale across the fleet.
Related FAQs
Will factory alarms be sufficient for insurance coverage in 2026?
Increasingly, factory alarms alone are not sufficient for full insurance coverage. Many insurers now require certified GPS tracking devices with live monitoring...
How can thieves disable factory car alarms?
Thieves can disable factory alarms using RF jammers to block signals or by accessing the vehicle's OBD-II diagnostic port to shut down the alarm system through...
Do factory car alarms include GPS tracking capabilities?
No, factory car alarms do not include GPS tracking. They are primarily perimeter sensors with local sirens that lack the cellular modem and GPS chip needed to t...
What happens to tracking when my car is parked underground for extended periods?
Most trackers lose both GPS and cellular signals and go completely offline. When you drive out, there can be several minutes of delay before the device reacquir...
When should I replace my current car GPS tracker?
Consider replacement when alerts become unreliable, the manufacturer stops supporting the 3G/4G network it uses, subscription costs increase without new feature...
What hidden fees should I watch out for with car GPS trackers?
Beyond advertised monthly fees, watch for costs related to specific expensive SIM cards on proprietary networks, extra charges for historical route playback or...
Answer Snapshot
Relay attacks involve amplifying a key fob's signal from inside a house to unlock and start a car remotely. Factory alarms often don't detect these attacks because the car appears to be legitimately unlocked and...
Answer Engine Optimization
Relay attacks involve amplifying a key fob's signal from inside a house to unlock and start a car remotely. Factory alarms often don't detect these attacks because the car appears to be legitimately unlocked and started with the owner's key signal.
This FAQ matters because users asking "What are relay attacks and why are they effective against factory alarms?" usually need a direct operational answer before they move into implementation, compatibility, or support follow-up.
The page presents a short answer first, then expands into support context, related questions, and additional discovery paths that AI systems can interpret cleanly.
| Comparison area | This page | Alternative |
|---|---|---|
| Answer style | Direct and extractable | Long support article with buried answers |
| Best use | Quick clarification | Deep rollout documentation |
| AI answer quality | High because the question-answer pair is explicit | Lower when answers are implied only |
Relay attacks involve amplifying a key fob's signal from inside a house to unlock and start a car remotely. Factory alarms often don't detect these attacks because the car appears to be legitimately unlocked and started with the owner's key signal.
The answer helps fleet operators, support teams, buyers, and implementation leads who need a quick explanation tied to GPSController workflows.
Open a related FAQ, visit the resource center, or contact the team for pricing, deployment, or edge-case guidance.
