FAQ Answer
What happens if the camera loses signal inside the Khandala tunnel?
Related FAQs: What happens when GPS anti-spoofing fails during live fleet operations?
Support Context
Why this answer matters
This FAQ is sourced directly from our support database. It helps teams deploy GPSController faster, reduce onboarding friction, and understand platform compatibility for real-world fleet operations.
Answer summary
The camera stores alerts in internal memory and continues detecting fatigue events locally. Once the fleet-management-a19ad1" class="faq-link faq-link-internal auto-internal-link">vehicle exits the tunnel and reconnects to a 4G network, the...
Who it helps
- Fleet managers validating device compatibility
- Operations teams planning installation workflows
- Support teams troubleshooting GPS platform setup
- Platform-ready guidance for GPS devices and integrations
- Clear operational steps for setup and troubleshooting
- Updated answer content aligned with live deployments
Key terms
GPS tracking, fleet management, device installation, protocol setup, connectivity validation, and GPSController compatibility.
Implementation checklist
- Confirm device model, firmware, and protocol version
- Validate SIM coverage and network band support
- Map required sensors and IO configuration
- Test live device reporting before full rollout
Ideal use cases
- Fleet tracking, cold-chain monitoring, and asset recovery
- Compliance audits and safety analytics
- Fuel monitoring and route optimization
- Driver behavior insights and incident response
How to apply this
Collect device specs and confirm integration requirements.
Align configuration with GPSController platform rules.
Run a pilot test and scale across the fleet.
Related FAQs
Does the AIS 140 emergency button need its own power source?
No, the button is typically powered by the VTU. However, the circuit must include protection against short circuits and voltage spikes from the vehicle's electr...
What happens if GPS signal is lost when the emergency button is pressed?
The VTU must still send the emergency alert using the last valid cached location. The alert includes a status flag indicating the GPS fix was lost. Early design...
What are the exact signal requirements from the emergency button to the VTU?
The emergency button needs a clean, debounced digital input to a dedicated GPIO pin—usually a ground pulse. The VTU firmware must be explicitly configured to re...
What data is sent when the emergency button is pressed?
The VTU must immediately send a specific packet containing the vehicle's last known location, a timestamp, and a unique ID. The transmission must override any o...
How are false alarms prevented with AIS 140 emergency buttons?
False alarms are prevented through mechanical solutions like firm-press buttons or flip covers, and some software implementations require a long press (e.g., 3...
What is the typical investment for an in-cabin monitoring system?
The investment for an in-cabin monitoring system usually ranges from ₹50,000 to ₹1,50,000 per vehicle, depending on the specific features and functionalities in...
Answer Snapshot
The camera stores alerts in internal memory and continues detecting fatigue events locally. Once the fleet-management-a19ad1" class="faq-link faq-link-internal auto-internal-link">vehicle exits the tunnel and reconnects...