Sale is liveUpto 70% Off
00D
00H
00M
00S
Global Reach
US flagGB flagDE flagFR flagIN flagAE flagSG flagAU flagCA flagBR flagZA flagNG flagJP flagKR flagID flagES flagIT flagMX flagTR flagSA flag
US flagGB flagDE flagFR flagIN flagAE flagSG flagAU flagCA flagBR flagZA flagNG flagJP flagKR flagID flagES flagIT flagMX flagTR flagSA flag

FAQ Answer

Question

When should I replace the AIS 140 device instead of trying to fix the delay issue?

Answer
If the location delay exceeds 15 seconds during normal highway operation and all four eSIM profiles have been tested with the same outcome, avoid simple software tuning. Reconfigure the device to use GPS-only mode as a fallback or redesign antenna placement first. If the delay persists after these steps, the hardware is likely insufficient and you should replace the unit with one that has a higher-sensitivity NavIC receiver.
Category: gps_device_advancedUpdated: May 6, 2026

Support Context

Why this answer matters

This FAQ is sourced directly from our support database. It helps teams deploy GPSController faster, reduce onboarding friction, and understand platform compatibility for real-world fleet operations.

Answer summary

If the location delay exceeds 15 seconds during normal highway operation and all four eSIM profiles have been tested with the same outcome, avoid simple software tuning. Reconfigure the device to use GPS-only mode as a fallback or redesign...

Who it helps

  • Fleet managers validating device compatibility
  • Operations teams planning installation workflows
  • Support teams troubleshooting GPS platform setup
  • Platform-ready guidance for GPS devices and integrations
  • Clear operational steps for setup and troubleshooting
  • Updated answer content aligned with live deployments

Key terms

GPS tracking, fleet management, device installation, protocol setup, connectivity validation, and GPSController compatibility.

Implementation checklist

  • Confirm device model, firmware, and protocol version
  • Validate SIM coverage and network band support
  • Map required sensors and IO configuration
  • Test live device reporting before full rollout

Ideal use cases

  • Fleet tracking, cold-chain monitoring, and asset recovery
  • Compliance audits and safety analytics
  • Fuel monitoring and route optimization
  • Driver behavior insights and incident response

How to apply this

Step 1

Collect device specs and confirm integration requirements.

Step 2

Align configuration with GPSController platform rules.

Step 3

Run a pilot test and scale across the fleet.

Related FAQs

Answer Snapshot

If the location delay exceeds 15 seconds during normal highway operation and all four eSIM profiles have been tested with the same outcome, avoid simple software tuning. Reconfigure the device to use GPS-only mode as a f...

GPS TrackingFleet OpsDevice SetupCompatibility